Select the 'Wire Manager' button from the Linear Draft toolbar.
The ‘Wire Manager’ form will be displayed. Select the auxiliary wire that you want to add equipment to from the 'Selected Wire' drop-down menu.
Click ‘Edit’ on the structure you want to add the equipment to.
The ‘Wire Configure’ form will be displayed, check the ‘Equipment’ box to open the equipment configuration section of the form.
Select the height that you want to place the equipment and choose to place the equipment on the left or right side of the mast.
In the example below, the structure is an STC and the equipment will be attached directly to the mast.
If the auxiliary wire is to be anchored at your chosen structure, please see the anchoring method here.
Click ‘Add’ in the Bracket column to display the 'Add Bracket' form.
Choose which bracket you want to use and click 'Confirm'.
The 'Wire Configure' form will be displayed. The bracket will be shown in the Bracket column and 'Support’ will now be populated.
Click 'Confirm' to accept.